A very Lean global automotive Original Equipment Manufacturer had to very quickly increase production volumes because increased demand had created a backlog



This case study is about a mission Marris Consulting did in 2011 in Mexico for a large automotive equipment manufacturer, which was reputed to be among the 30 best practices in terms of Lean Manufacturing in the world. The factory was about 1,000 people broken up into 20 autonomous production units.


Our client’s need


Our client asked us to help them in one of their factories in Mexico. Their problem was that they were not managing to produce enough. There was a reasonably low demand for their products in previous years and suddenly, the demand rose. They started having trouble delivering their clients on time and honoring their orders. They asked Marris Consulting to try and help them by injecting Theory of Constraints into their system to see if we could produce more in that way.




The goals were:

  • To increase the production volumes very significantly to meet a significant increase in demand

  • To eliminate the client delivery backlog

  • To put an end to colossal Premium Freight expenses (airplane deliveries)

  • To restore the client confidence of its clients, especially its biggest customer, one of the world's largest car manufacturers.


Approach used / Process


First, we went to the factory and quickly identified which part of the 20 production units was bottlenecked. We identified two and a half of them as being bottlenecks.

To build the product, a dozen of operations is needed. The bottleneck was one of these operations, in a production unit of about 10 people and producing about 6,000 units a day on a 24-hour basis.

They had already formally identified their bottleneck correctly with a sign next to it saying, "this is the bottleneck."

So we implemented one of the Theory of Constraints rules about 1 or 2% of the whole principles of the Theory of Constraints, which improved the throughput of the unit's performance by over 15% in 15 minutes.


How did we do that? What rule did we use?

We just added a buffer here in front of the bottleneck.

And in 15 minutes, what we did would change the rules. We said there should always be at least four parts, that is to say, four times 15 seconds, about a minute's worth of work. And that was enough to absorb all the micro stoppages on this unit. That ended up being a 17% increase within they are on a stable basis simply because they were getting lots of jams from this resource which was a non-bottleneck but not that reliable, and therefore we were losing quite a lot of time there.



The approach in the video: How to increase productivity by 15% in 15 minutes?


  • An increase in production volumes of more than 20% without investments

  • Very rapid increases in the productivity of the Autonomous Production Units (APU); in the most spectacular case productivity increased by 17% in 15 minutes 

  • 28% increase in average O.E.E. (Overall Equipment Efficiency) of the 20 production units with >50% increases for some production units (APUs)

  • Backlog eliminated in 9 weeks

  • Premium Freight Expenses divided by 10 in 3 months

  • Improved cycle times (units per minute) of all the identified bottlenecks

  • Redesign and implementation of a new plant layout: machines, WIP, purchased parts, Finished Goods

  • Implementation of a taylored version of TOC's Drum - Buffer - Rope product flow control mechanism

  • Reinforced and improved Kanban processes

  • Significant improvement in quality: improved the PPM (Parts Per Million defects) through numerous shop floor initiatives and reinforcement of updating and using standard procedures

  • Integration of a Theory Of Constraints module in their internal university training program

  • Return On Investment of the consulting assignment in less than one month.

I do the same

Home>Clients missions>Automotive equipment manufacturer in Mexico

About Marris Consulting

Marris Consulting is an industry consulting and training company specialized in the Theory of Constraints (ToC) and Critical Chain Project Management. We focus on improving the performance of manufacturing and process industries by using Constraints Management combined with Lean and Six Sigma. To boost project performance, we also use Critical Chain Project Management (CCPM), which we sometimes combine with Lean Engineering. Our 2-day performance audits, our performance consulting services and our project management, Lean, ToC & CCPM training by our industry consultants offer a wide range of solutions to help our clients around the world reach the highest possible levels of performance.

Social networks



Our newsletter


Tour Maine Montparnasse, 27éme étage
33, avenue du Maine - 75755 PARIS cedex 15

Tel. : +33 (0)1 71 19 90 40

Contact us via our form


Who are we ?


Legal Notice

Site map